Cyron Lighting HTP904E User Manual
Page 3

3
Installations
1. LIGHTBAR LOCATIONS NOTE:
Depending on the application, as few as one or
as many as six lightbars may be used. There are
many intended uses and methods of light
placement. In most of the cases, the objective is
to place the lightbar so it is not directly visible,
and its projected light is only seen. This is
particularly important if combined colors such
as white are being produced. Feel free to
experiment with light placement and direction
of light projection. There may be more than one
good location.
Television Backlighting: The best location for television installations is
normally behind the TV, about 1 to 4 inches from the outer edges (left and right
in most cases). Also, vertically center the bars. See TV backlighting diagram.
The exact location may vary depending on the make and model of the TV.
Cabinets, Shelving, Furniture: Typical locations are: Top or bottom of the
cabinets, behind furniture trimmings, on the shelves, and behind glass covers.
Same general locations work well for most objects. There are many ways to
backlight and accent light. Try various positions to achieve the desired results.