Cyron Lighting HTP904E - Manual (Page 2)

2
www.CYRON.com
Multicolor LED Lighting
Media Highlighter ®
HTP904E
Thank you for purchasing CYRON HTP904E Multicolor LED Lighting
System. This system will bring the latest lighting technology to your home
theatre, home décor, cabinets, and many other areas you choose. Installation of
the system is simple and it can be done by anyone with little or no electrical
experience. Nonetheless, some custom installations may require professional
help. Please contact CYRON Technical Support for advice.
General Cautions

To reduce the risk of fire, electric shock, or injury:

Route and secure cords so that they will not be pinched or damaged

To further secure the wires, use only insulated staples or plastic ties

Not intended for recessed installations

Not intended for surface installation inside built-in furnishings

Do not install the entire system in closed compartments smaller than 4
cubic feet (26”x30”x10”)

To comply with National Electrical Code (NEC) and to prevent fire
danger, run the cords where they are accessible for examination. Cords
should be visually examined periodically and immediately replaced when
any damage is noted.
Contents
Please locate all system components. If any of the
components are missing or damaged contact CYRON
before proceeding with installation.
1 x Controller/Hub, HTC110A
4 x Lightbars 9"
1 x Power supply 12W
8 x Mounting brackets
Tapes, Hardware, Wipes
Español
page 6