Clinton Electronics CE-M19SD-B - Manual (Page 35)

35
Problem Solution
The MOTION DETECTION
function is not working.
Check if ‘MOTION DETECTION’ mode is turned on. •
Check if the MD LEVEL is too low. •
Check the setting of the MD AREA. •
Colors are not quite right. Check the ‘WHITE BAL’ setting. •
The screen is flickering. Check if the camera is facing directly into sunlight or fluorescent light. •
L/L mode isn’t able to be
selected.
Have you connected your camera to DC power source? Connect it to •
AC power source.
L/L mode is not available. When using DC 12V input power, ‘SYNC’ mode is fixed to ‘INT’. •
COLOR (DAY & NIGHT)
mode is not working.
Check if the AGC menu is set to the OFF position. •
SENS-UP function is not
working.
Check if the AGC menu is set to the OFF position. •
Check the limit of SENS-UP AUTO mode. •