Clinton Electronics CE-M19SD-B User Manual
Page 22
22
Notes
• White Balance may not work properly under the following conditions. In this case select the AWC
mode.
jWhen the color temperature of the environment surrounding the subject is out of the control
range (ie. clear sky or sunset).
kWhen the ambient illumination of the subject is dim.
lIf the camera is directed towards a fluorescent light or is installed in a place where illumination
changes dramatically, the White Balance operation may become unstable.
Notes
• If you press the SET button in ‘AUTO’ mode, you can adjust brightness by increasing or decreasing
the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely it is that an after-
image will appear.
• Although noise, spots, and whitish symptoms may occur in SENS-UP operation when the zoom
level is increased, this is normal.