American Fibertek Scout SS1 - Manual (Page 11)

11
1 Common
2 IN -
3 IN +
4 OUT +
5 OUT -
6 Common
Rear Panel
Power Connection:
This is a universal power input 100 to 240 VAC 50 to 60 Hz.
Ethernet Connection:
This an RJ45 jack used for connection to 10/100BaseT Ethernet network.
RS 232 Data Port Connection:
This is a standard DB9 DTE RS232 connector. Typically a null modem cable would be used for
connection.
RS 485 Data Port Connection:
This port can be used for data inputs and outputs
from devices such as access control panels and
cash register printers and control of external
PTZ devices.
Pins 1 - 6
RS 485 RJ12 Connector
Both ports A & B are compliant to RFC 2217. In other for a Windows program to recognize these
ports, a driver must built into the program or the system can use freeware programs. For an
update listing of such programs go to
www.vnes.net . AFI Pilot software programs contained RS
232 and RS 485 port communications as standard features
Probe Ports
USB ports used to connect Temperature and Airflow (P-TA),r Temperature, Airflow and
Humidity (P-TAH), or P-VFP Power probes. These ports are not compatible with standard USB
devices.