STEINEL HFLUM2-WR - Manual (Page 2)

Usage considerations Continued
• Consider the interaction between
various OEM components such as
ballast and lamp types. All components
should be tested for complete
compatibility as a system.
• The HFLUM2-WR is a UL/CUL
Listed open type device that requires
installation in a fixture or listed junction
box or enclosure.
• When use in indoor locations where the
temperature may be less than actual
room conditions, such as unheated
warehouses or garages the HFLUM2-
WR is to be totally enclosed.
• The antenna used for this transmitter
must be installed to provide a
separation distance of at least 20
cm from all persons and must not be
collocated or operating in conjunction
with any other antenna or transmitter
within a host device, except as
described in accordance with FCC
multi-transmitter product procedures.
• One HFLUM2-WR
• Installation Instructions
Needed for installation
• Two mounting screws
• Fixture or listed enclosure
Applications
• Wide variety of interior spaces
including offices, conference rooms,
classrooms
Intended uses
• For indoor use only
• Sensor mounts inside a lighting fixture
Usage considerations
• When fluorescent lamps are new or
at cold temperatures, the sensor may
detect gas moving inside the lamps.
In this case, switch the lights OFF and
reduce the reach setting.
• Use only high quality brand-name
lamps.
• Fixture configurations can vary
considerably. Since metal surfaces
reflect high-frequency signals, the
detection pattern may vary from the
standard published coverages or
reach. Each fixture design must be
tested for proper coverage accuracy.
Package Contents
Installation Overview
www.steinel.net (800) 852-4343
WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor module must be installed and used in accordance with appropriate
electrical codes and regulations
• Installation by a qualified electrician is recommended
2