GE JGRP20WEJWW - Manual (Page 9)

Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Centigrade selections.
Touch the BAKE and BROIL HI/LO pads
at the same time for 2 seconds until the
display shows SF.
Touch the BROIL HI/LO and COOKING
TIME pads at the same time for 2 seconds.
The display will show F (Fahrenheit).
Touch the BROIL HI/LO and COOKING
TIME pads again at the same time
for 2 seconds. The display will show C
(Centigrade).
Touch the START pad.
Changing the Speed of the +/– Pads
As you use the +/– pads when setting a time
or temperature, you may notice the display
changes slowly. This special feature allows you
to change the speed.
To set the speed you prefer, follow the steps
below:
Touch the BAKE and BROIL HI/LO pads
at the same time for 2 seconds until the
display shows SF.
Touch the + pad. The display will show you
a set speed between 1 and 5.
Touch the + pad to increase the speed up
to the number 5.
Touch the – pad to decrease the speed
down to the number 1.
Touch the START pad to activate the
setting and leave the control set in this
special features mode.
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military
time clock or black-out the clock display, follow
the steps below:
Touch the BAKE and BROIL HI/LO pads
at the same time for 2 seconds until the
display shows SF.
Touch the TIMER/CLOCK pad once. The
display will show 12 hr.
Touch the TIMER/CLOCK pad again to
change to the 24-hour military time clock.
The display will show 24 hr.
Touch the TIMER/CLOCK pad again to
black-out the clock display. The display will
show OFF.
Touch the START pad to activate your
choice and leave the control set in this
special features mode.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
GEAppliances.com
Control Lockout
Your control will allow you to lock out the
touch pads so they cannot be activated when
touched.
To lock the controls:
Touch the BAKE and BROIL HI/LO pads
at the same time for 2 seconds until the
display shows SF.
Touch the SELF CLEAN pad. The display
will show LOC OFF.
Touch the SELF CLEAN pad again. The
display will show LOC.
Touch the START pad to activate the
control lockout feature and leave the
control set in this special features mode.
When this feature is on and the touch pads
are touched the control will beep and the
display will show LOC.
NOTE: The control lockout mode will not affect
the clock, timer and oven light touch pads.
9