GE JGRP20WEJWW - Manual (Page 6)

Using the oven controls.
BAKE Pad
Touch this pad to select the bake function.
BAKE Light
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQFKDQJHWKHRYHQ
temperature at this point. Glows when the oven is in bake
mode.
BROIL HI/LO Pad
Touch this pad to select the broil function.
BROIL Light
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQVZLWFKIURPHI to
LO BROIL at this point. Glows when the oven is in broil mode.
Display
Shows the operations you have selected, the time of day
and the cooking status.
COOKING TIME Pad
Touch this pad and then touch the + or – pad to set the
amount of time you want your food to cook. The oven will
shut off when the cooking time has run out.
DELAY START Pad
Use along with the COOKING TIME or SELF CLEAN pad
to set the oven to start and stop automatically at a time
you set.
OVEN LIGHT ON/OFF Pad
Touch this pad to turn the oven light on or off.
TIMER/CLOCK Pad
Touch this pad to select the timer feature. Then touch +
and – pads to adjust time.
To set the clock, touch this pad twice and hold 3 seconds
and then touch the + and – pads. The time of day will
flash in the display when the oven is first turned on.
START Pad
Must be touched to start any cooking function.
– Pad
Short taps to this pad will decrease the time or
temperature by small amounts. Touch and hold the pad
to decrease the time or temperature by larger amounts.
+ Pad
Short taps to this pad will increase the time or
temperature by small amounts. Touch and hold the pad
to increase the time or temperature by larger amounts.
CLEAR/OFF Pad
Touch this pad to cancel ALL oven operations except the
clock and timer.
SELF CLEAN Pad
Touch this pad to select the self-cleaning function. See the
Using the self-cleaning oven section.
CLEAN Light
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQFKDQJHWKHOHQJWKRI
time for the self-clean cycle at this point. Glows when the
oven is in the self-clean cycle. After the self-clean cycle, the
light will turn off. Unlatch the door.
If “F–” and a number or letter flash in the display and the oven
control signals, this indicates a function error code.
Touch the CLEAR/OFF pad. Allow the oven to cool for one hour.
Put the oven back into operation.
If function error code repeats, disconnect power to the oven and
call for service.
Oven Control, Clock and Timer Features and Settings
6