GE JTP90DPBB - Manual (Page 30)

30
Using the self-cleaning lower oven.
7KHRYHQGRRUPXVWEHFORVHGDQGDOOFRQWUROVPXVWEHVHWFRUUHFWO\IRUWKHF\FOHWRZRUNSURSHUO\
How to Delay the Start of Cleaning
DYDLODEOHRQ-.3PRGHOVRQO\
Press the Self Clean pad.
Using the number pads, enter the desired
clean time.
Press the Delay Start pad. The earliest
start time you can set will appear in the
display.
Using the number pads, enter the time of
day you want the clean cycle to start.
Press the Start pad.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and the
LOCKED or LOCKED DOOR light goes off.
When the LOCKED or LOCKED DOOR light goes
off, you will be able to open the door.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a
soap-filled steel wool pad and rinse thoroughly
with a vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
„ You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
„ While the oven is self-cleaning, you can press
the Clock pad to display the time of day. To
return to the clean countdown, press the
Cooking Time pad.
„ If the racks become hard to slide, apply a
small amount of vegetable oil or cooking oil
to a paper towel and wipe the edges of the
racks with the paper towel.