Alpine DVA-9965E - Manual (Page 33)

31
-EN
Rear DVD Function
1
Select the desired audio source.
2
Press MENU.
3
Select Rear DVD by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Rear DVD.
4
Select ON or OFF by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under ON or OFF.
If ON is set:
You can enjoy the picture and background of an inserted
disc on the front or rear monitor while listening to an
alternate audio source, such as the radio, on this unit.
The Rear DVD function setting determines which remote
control sensor is recognized. When remote control
operation is disabled, operation from the head unit
controls is still possible.
Confirm this in the following table.
* 1 Use the remote control sensor of the connected monitor.
* 2 If an Alpine touch panel compatible monitor (monitor control lead
connected) is connected and touch operation can be performed.
5
Press and hold MENU for at least 2 seconds to
return to normal mode.
• The volume of any add-on displays (rear monitor, etc.) cannot be
adjusted from the DVA-9965E.
Adjust the volume on the display itself. In addition, its sound
cannot be muted.
• The function for external interruption of the sound of the rear
monitor (from the navigation system, for example) cannot be used
when the rear DVD function setting is turned on.
• If you are listening to the AM radio while the rear DVD function is
set to ON, noises may be heard from the radio, but this is not a
malfunction.
i-Personalize™ Data
Download Operation
About i-Personalize™ Data Download
You can download data (from Alpine’s website) to a CD-R, and
download and store the data to the DVA-9965E.
To start i-Personalize, access the URL below and follow the on-screen
instructions.
http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au
Downloadable data
The file name of download data shall be
“A_U*****.MP3.”
A_U
∗∗∗∗∗.MP3
Extender (fixed)
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
• For downloading procedure details, see Alpine’s website.
• If the HDA-5460 model is connected to this unit, the HDA-5460
hard disc can be used. Data that has been stored in the hard disc is
downloaded by the “Data Downloading” operation to
DVA-9965E. For details on how to download data to the hard disc,
refer to the Owner’s Manual of the HDA-5460 model.
• If an external audio processor is connected, data that is
downloaded cannot be used.
Data is memorized in Preset 6 of the
Parametric EQ mode or Graphic EQ
mode.
Data is memorized in Preset 6 of the
Time Correction mode.
Data is memorized in Preset 6 of the
crossover mode.
Data is set to the opening display.
Data is set to the calendar message.
Parametric
equalizer or
Graphic equalizer
Time correction
Crossover
Profile
Calendar message
SOURCE/POWER
GlideTouch bar MENU
SOURCE
Built-in
DISC
Built-in
TUNER
Ai-NET
Changer
etc.
REAR
DVD
ON/
OFF
setting
ON
OFF
ON
OFF
ON
OFF
Remote Input is
connected* 1 or
remote control
with optional
remote control
eye (KRE-500E).
Remote control
of built-in disc
mode
Inoperable* 2
Remote control
of built-in disc
mode
Inoperable* 2
Remote control
of built-in disc
mode
Inoperable* 2
Remote
control with
the unit’s
built-in
sensor
Inoperable
Remote
control of
built-in disc
mode
Inoperable
Remote
control of
Tuner mode
Inoperable
Remote
control of
Changer etc.
Operation
by the unit
buttons
Unit buttons
control of
built-in disc
mode
Unit buttons
control of
built-in disc
mode
Unit buttons
control
Tuner mode
Unit buttons
control
Tuner mode
Remote
control of
Changer
etc.
Remote
control of
Changer
etc.