Acer 505 series - Manual (Page 105)

83
Onboard Device Configuration
The Onboard Device Configuration screen contains parameter settings for your
hardware connection devices.
Caution: The parameters in this screen are for advanced users only. You do
not need to change the values in this screen because these values are already
optimized.
Boot Drive
Sequence Allows you to set the sequence wherein the computer will boot 1st,
2nd, and so on. Below are possible boot devices.
Boot from
CD-ROM Enables boot-up from the CD-ROM drive, if selected as the first
option. The computer attempts to boot from the CD-ROM drive
(looks for a bootable CD-ROM) before following the boot sequence
specified in the Boot Drive Sequence.
Floppy Enables boot-up from the floppy disk drive, if selected as the first
option. The computer attempts to boot from the floppy disk drive
(look for a bootable floppy) before following the boot sequence
specified in the Boot Drive Sequence.
Hard Disk Enables boot-up from the hard disk drive.
Parameter Description