Nilfisk-ALTO S-8 - Manual (Page 13)

21
23
22
1 1
2 2
STEREO AUX RETURN AUX SEND 2-TRACK IN/OUT
TAPE IN TAPE OUT
LEFT LEFT RIGHT RIGHT
L
R
1 1
2 2
LEFT(MONO) RIGHT
21 - 2-TRACK IN/OUT
Use the Tape input if you wish to listen to your Mix from a Taper Recorder or DAT, You can assign the signal coming
form the Taper Recorder either to a pair of studio monitor using the Control Room assignment on the front panel or
you can also send the signal directly to the Main Mix.
Input
Output
These 1/4" TRS sockets will route the main mix into a tape recorder.
12
This socket will send out the signal mix to a pair of headphones.
24 - PHONES
PHONES PHONES
24
Use these stereo 1/4" phone socket to return the sound of an effect unit or sound processor to the Main Mix.
Alternatively you can use them as an extra auxiliary input.
- STEREO AUX RETURN 22
This 1/4" phone socket is used to send out the signal from the AUX Bus to external devices such as effects and
sound processors.
- AUX SEND 1 AND 2 23