HP Mini 210-2087dx PC - Manual (Page 35)

Resolving a low battery level
Resolving a low battery level when external power is available
▲ Connect one of the following devices:
● AC adapter
● Optional docking or expansion device
● Optional power adapter purchased as an accessory from HP
Resolving a low battery level when a charged battery is available
1. Save your work.
2. Turn off the computer or initiate Sleep.
3. Replace the discharged battery with a charged battery.
4. Turn on the computer.
Resolving a low battery level when no power source is available
● Initiate Sleep.
● Save your work and shut down the computer.
Resolving a low battery level when the computer cannot exit Sleep
When the computer lacks sufficient power to exit Sleep, follow these steps:
1. Replace the discharged battery with a charged battery, or connect the AC adapter to the
computer and to external power.
2. Exit Sleep by briefly sliding the power switch.
Storing a battery
CAUTION: To reduce the risk of damage to a battery, do not expose it to high temperatures for
extended periods of time.
If a computer will be unused and unplugged from external power for more than 2 weeks, remove the
battery and store it separately.
To prolong the charge of a stored battery, place it in a cool, dry place.
NOTE: A stored battery should be checked every 6 months. If the capacity is less than 50 percent,
recharge the battery before returning it to storage.
Calibrate a battery before using it if it has been stored for one month or more.
Disposing of a used battery
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short
external contacts; do not dispose of in fire or water.
Refer to the Regulatory, Safety, and Environmental Notices for battery disposal information.
Using battery power 27