HP ProLiant DL585 G7 Server - Manual (Page 57)

Hardware options installation 57
6. Install the shipping screw.
7. Close the expansion slot retainer.
8. Install the access panel (on page 27 ).
9. Slide the server back into the rack.
10. Power up the server (on page 25 ).
11. Resume normal server operations.
Installing the PCI Express I/O expansion board
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all expansion slots have either an expansion slot cover or an expansion board installed.
IMPORTANT: When either optional I/O expansion board is installed in a two-processor
configuration, processor 2 and the I/O enabler must be installed.
1. Power down the server (on page 25 ).
2. Extend the server from the rack (on page 25 ).
3. Remove the access panel (on page 26 ).