Processor options, Installing a processor option – HP ProLiant DL585 G7 Server User Manual
Page 37
Hardware options installation 37
Processor options
The server supports up to four processors.
Observe the following processor installation guidelines:
•
Processor socket 1 must be populated.
•
HP recommends installing processors in pairs.
When configuring the server, see the following table to determine which processors must be populated to
ensure which expansion slots can be used.
Processor
Expansion slots
1
Expansion slots 10 and 11
2
Expansion slots 7–9
3
Expansion slots 4–6
4
Expansion slots 1–3
Installing a processor option
The processors and memory are located in the drawer accessible from the front of the server. It is not
necessary to extend or remove the server from the rack to install or replace processors and memory.
WARNING:
Use caution when installing the processor memory module or removing the
processor memory module. The processor memory module is very heavy when fully populated.
CAUTION:
To help avoid damage to the processor and system board, do not install the
processor without using the processor installation tool.
CAUTION:
To prevent possible server malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
IMPORTANT:
When either optional I/O expansion board is installed in a two-processor
configuration, processor 2 and the I/O enabler must be installed.
To install the component:
1.
Update the system ROM.
Locate and download the latest ROM version from the HP website
.
Follow the instructions on the website to update the system ROM.
2.
Power down the server (on page
3.
Remove the processor memory drawer (on page
CAUTION:
To prevent damage to the processor memory drawer cover, be sure the handle of the
processor memory drawer is fully open before removing the cover.