HP OmniBook 2000 Notebook PC - Manual (Page 28)

Troubleshooting
Solving Basic Problems
1-28
To resolve CD-ROM drive problems
Excessive static electricity discharges may cause the CD-ROM drive to stop
working. If the CD-ROM drive stops responding
•
Remove and insert the CD-ROM drive again.
•
Save your work, then press CTRL+ALT+DEL to reboot.
•
If nothing happens, reset the OmniBook (see page 1-13).
To resolve battery problems
If the OmniBook doesn’t turn on with a fresh battery
•
The new battery pack may be low. Plug in the ac adapter.
•
If nothing happens, r eset the OmniBook (see page 1-13).
If the battery pack doesn’t charge or stops charging
•
Check that the battery is fully installed and locked in place.
•
Turn off the OmniBook, then check that the battery contacts are clean and that
the ac adapter cables are fully plugged in.
•
Move the OmniBook away from any nearby heat source. Unplug the ac adapter
and allow the battery to cool down. An elevated battery temperature prevents
charging.
If the battery runs down too fast
•
If the operating time has gotten shorter and the battery pack is more than a year
or two old, you may need a new battery .