HP OmniBook 2000 Notebook PC - Manual (Page 21)

Using OmniBook Accessories
Installing a New Hard Drive
1-21
To remove the hard drive
1. Important
Back up all the files on your current drive C. You can back up the files to a tape
drive, a network drive, a PC card, or a flexible disk.
2. Unplug the adapter.
3. Exit Windows.
•
If you’re using Windows 95, use the shutdown option from the Start menu.
•
If you’re using Windows for Workgroups, exit Windows, then press
CTRL+ALT+blue On/Off button simultaneously.
4. Remove all batteries from the OmniBook.
5. Close the cover and turn your computer over.
6. Remove the screw and security cover located at the back of the hard disk drive.
7. Firmly slide the drive out of the drive compartment. (This requires some force.)