HP LaserJet Pro MFP M127fw - Manual (Page 100)

Optimize for text or pictures
The following copy-quality settings are available:
● Auto Select : Use this setting when you are not concerned about the quality of the copy. This is the
default setting.
● Mixed : Use this setting for documents that contain a mixture of text and graphics.
● Text : Use this setting for documents that contain mostly text.
● Picture : Use this setting for documents that contain mostly graphics.
LCD control panel
1. Load the document on the scanner glass according to the indicators on the product.
2. On the product control panel, press the Copy Menu button.
3. Select the Optimize menu.
4. Use the arrow buttons to scroll through the options, and then press the OK button to select an option.
5. Touch the Start Copy button to start copying.
Touchscreen control panel
1. Load the document on the scanner glass according to the indicators on the product.
2. From the Home screen on the product control panel, touch the Copy button.
3. Touch the Settings button, and then scroll to and touch the Optimize button. Touch the arrow buttons
to scroll through the options, and then touch an option to select it.
4. Touch the Start Copy button to start copying.
Edge-to-edge copying
The product cannot print fully edge-to-edge. There is a 4 mm (0.2 inch) unprintable border around the page.
Considerations for printing or scanning documents with cropped edges:
● When the original is smaller than the output size, move the original 4 mm (0.2 inch) away from the
corner indicated by the icon on the scanner. Recopy or scan in this position.
● When the original is the size of the printed output that you want, use the Reduce/Enlarge feature to
reduce the image so the copy is not cropped.
92 Chapter 8 Solve problems ENWW