HP EliteBook 755 G2 Notebook PC - Manual (Page 30)

in the HP Mobile Broadband information provided with your computer or the mobile network operator
may provide it separately from the computer.
For information about inserting and removing the SIM, see
Inserting and removing a SIM
on page 20 in this chapter.
For information about HP Mobile Broadband and how to activate service with a preferred mobile
network operator, see the HP Mobile Broadband information included with your computer.
Inserting and removing a SIM
CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM, follow these steps:
1. Turn off the computer by using the Shut down command.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the service door release latch toward you.
6. Remove the service door (see Removing the service door on page 52 ).
7. Remove the battery (see Removing a battery on page 43 ).
8. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE: The SIM in your computer may look slightly different from the illustration in this section.
NOTE: See the image on the battery bay to determine which way the SIM card should be
inserted into your computer.
9. Replace the battery.
NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.
10. Replace the service door (see Replacing the service door on page 53 ).
11. Reconnect external power.
20 Chapter 3 Connecting to a network