Audiovox DV 1680 User Manual

Page 16

4.18

4.19

4.17 A/V Signal Input/Output Switch

Slide the switch to set the DVD Player to input or

output mode.

When the switch is in the IN position, all output

signals from the DVD Player are muted so the DVD
Player can receive input signals. MAKE SURE THE
INPUT/OUTPUT SWITCH IS IN THE OUT POSITION
BEFORE TRYING TO PLAY A DISC.

4.18 S-VHS Output

Using the S-VHS signal produces better picture

quality. Connect it with a S-VHS cable (optional) between
the DVD Player and your TV .

The S-VHS signal output cannot be used while

DVD Player is powered by the battery. The battery
connector is covered when the S-VHS signal is being
used.

4.19 DC In

The DVD Player comes with an AC adapter for indoor

or long-time playing use. Connect the adapter's power
cord to a household power source. Connect the other
end of the adapter to the DC IN connector on the DVD
Player.

Use only the AC adapter that is shipped with the

DVD Player. Using a substitute adapter may result in
damage to the DVD Player.