HP LaserJet 5100 Printer series - Manual (Page 119)

ENWW
Control Panel Menus B-13
CLEARABLE
WARNINGS=JOB JOB
ON Set the amount of time that a clearable warning
is displayed on the printer’s control panel.
JOB : Warning messages display on the control
panel until the end of the job from which they
were generated.
ON : Warning messages display on the control
panel until [Go] is pressed.
AUTO CONTINUE=
ON ON
OFF Determine how the printer reacts to errors.
ON : If an error occurs that prevents printing, the
message will display, and the printer will go
offline for 10 seconds before returning online.
OFF : If an error occurs that prevents printing,
the message will remain on the display and the
printer will remain offline until
[Go] is pressed.
TONER
LOW=CONTINUE CONTINUE
STOP Determine how the printer behaves when toner
is low. The
TONER LOW message will first
appear when the print cartridge is almost out
of toner. (About 100 to 300 sheets can still be
printed.)
CONTINUE : The printer will continue to print
while the TONER LOW message is displayed.
STOP : The printer will go offline and wait for
further action.
For more information, see page 52.
RAM DISK=AUTO OFF
ON
AUTO Determine how the RAM disk is configured.
This item appears only if the printer has at least
8 MB of memory.
OFF : The RAM disk is disabled.
ON : The RAM disk is enabled. Configure the
amount of memory to be used through the
following item:
RAM DISK SIZE .
Note
If the setting is changed from OFF to ON or from
OFF to AUTO , the printer will automatically
reinitialize when it becomes idle.
Configuration Menu (Continued)
Item Values Explanation