HP Compaq LA2206xc 21.5-inch Webcam LCD Monitor - Manual (Page 32)

Table 4-2 OSD Menu (continued)
Icon Main Menu Submenu Description
Factory Reset Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Source Control Selects the video input signal. DP (DisplayPort) is
the factory default.
DisplayPort Selects DisplayPort as the video input signal.
DVI Selects DVI as the video input signal.
VGA Selects VGA as the video input signal.
Default Source Selects the default or primary video input signal
when the monitor is connected to two active and
valid video sources. The monitor will automatically
determine the video format. The choices are:
● DisplayPort
● DVI
● VGA
The factory default is DisplayPort.
Auto-Switch Source Turns the system's automatic video signal input to
On or Off. The factory default is On.
Source Detection This option is displayed in the OSD when a
DisplayPort input is selected. You can set Source
Detection to:
● Always Active
● Low Power
The factory default is Low Power.
Exit Exits the OSD menu screen.
24 Chapter 4 Operating the Monitor ENWW