HP LE2001w 20-inch Widescreen LCD Monitor - Manual (Page 30)

Table 4-2 OSD Menu (continued)
Icon Main Menu Submenu Description
Backlight Hours Reports the total hours of backlight operation.
Service Support http://www.hp.com/support
Factory Reset Returns all OSD menu settings and DDC/CI controls to
the factory default settings, except the Language.
Source Control
(LE2001wm model
only) Selects the video input signal. VGA is the factory
default.
DVI Selects DVI as the video input signal.
VGA Selects VGA as the video input signal.
Default Source Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The choices are:
● DVI
● VGA
The factory default is VGA.
Auto-Switch Source Turns the system's automatic video signal input to On
or Off. The factory default is On.
Exit Exits the OSD menu screen.
22 Chapter 4 Operating the Monitor ENWW