HP StorageWorks 2.140 Director Switch - Manual (Page 92)

Configuring SAN products and fabrics 90
4. Enter the appropriate values for the following parameters:
• ServerIp
• ProductIp
• UserName
• Password
Example:
...ElementManagerStandAlone -s 172.16.9.10 -p 172.16.9.211 -u Administrator
-pw password
5. Save and close the file.
6. Run the script by double-clicking the file or entering the script name at a DOS prompt.
Searching for products in a SAN
You can search for a product in a SAN by entering a parameter in the search box on the toolbar.
1. Enter the search parameter (for example, an IP address) in the Search box on the HAFM toolbar.
2. Click the up or down arrow to search through the Physical Map.
3. Click Search to find each product.
NOTE: When the application finds a product, it highlights the product on the Physical Map as well
as on the Product List.
Changing product properties
You can change some of the properties of products that are online. This process does not change
the product configuration.
To change product properties:
1. Right-click a product icon and select Properties.
The Properties dialog box is displayed (
Figure 46 ).
Figure 46 Properties dialog box