HP StorageWorks 2.140 Director Switch - Manual (Page 50)

Using the HAFM application 48
Turning flyovers on or off
Flyover text is displayed when you place the cursor on a product. They provide a quick way to view
a product’s properties.
To turn flyovers on or off:
1. Select View > Enable Flyover Display and select the check box to enable flyovers.
Or
Select View > Enable Flyover Display and deselect the check box to disable flyovers.
Configuring nicknames
HAFM allows you to use nicknames as a method of providing simple names to products and ports in
a SAN. Using HAFM you can:
• Associate a nickname with a product or port WWN that has been discovered.
• Add a WWN and an associated nickname for a product or port that has not yet been
discovered.
• Remove or disassociate a nickname from a WWN.
Viewing nicknames
You can view devices by the device nickname.
1. Select Configure > Nicknames.
The Configure Nicknames dialog box is displayed (
Figure 14 ).
Figure 14 Configure Nicknames dialog box
2. Using the Display list, specify how you want to display devices:
• Select All Nicknames to display all devices with a nickname.
• Select All WWNs to display all discovered devices with a WWN.