HP StorageWorks 2.140 Director Switch User Manual
Page 200
Troubleshooting
204
Broadcast request is blocked by
routers.
Resolution 1: If you know the IP addresses, and they are
not in the Available Addresses list:
1.
Select Discover > Setup.
2.
Click Add.
3.
Enter data in the dialog box.
4.
Click OK.
5.
through
until all
addresses are available.
6.
Select the IP addresses you would like to discover in
the Available Addresses list.
7.
Click
to move your choices to the Selected
Individual Addresses list.
8.
Click OK.
Resolution 2: If you know the IP addresses and the
addresses are listed in the Available Addresses list:
1.
Select Discover > Setup.
2.
Select the IP addresses you would like to discover in
the Available Addresses list.
3.
Click
to move your choices to the Selected
Individual Addresses list.
4.
Click OK.
Resolution 3:
This method significantly increases your discovery time.
If you don’t know the specific IP addresses:
1.
Select Discover > Setup.
2.
Click the Method column for the selected subnet in
the Selected Subnets list and select Sweep.
3.
Click OK.
Discovery time is excessive.
Resolution 1:
1.
Select Discover > Setup.
2.
Click the Method column in the Selected Subnets
pane and select Broadcast.
3.
Click OK.
Resolution 2: Decrease the SNMP timeout to decrease
the discovery time.
Cannot open an Element
Manager for an HP device.
Ensure that only one copy of the application is being
used to monitor and manage the device.
The
symapi.jar
file is not in
the class path.
Verify that the
symapi.jar
file has been copied to
HAFM’s
lib
directory.
Table 25
Discovery problems and resolutions (continued)
Problem
Resolution