HP StorageWorks 2.140 Director Switch - Manual (Page 171)

HA-Fabric Manager user guide 169
A default user is set up in the switch user base. The ID of the user is Administrator and the password
is password. There is one default user displayed in the table, and the Telnet and HAFM Basic check
boxes are selected.
Adding a new user
To add a new user:
1. Click Add.
The Add/Edit User dialog box is displayed (
Figure 102 ).
Figure 102 Add/Edit User dialog box
2. Enter information in the boxes.
User ID must be unique. If you specify an existing ID, it will be rejected. The maximum length of
password is 24 characters.
3. Click OK.
4. Assign the Administrator or Operator role to the user.
By default, all new users are set up with an Administrator privileges. You can changed this by
clicking the list under the Role column and selecting another option.
The Security Administrator can delete users from the switch user database. There must be at least
one user with Administrator privileges for Telnet and HAFM Basic. A message is displayed if you try
to delete the last user with Administrator privileges.
If a user is removed from the table, the user cannot access the switch through the Telnet or HAFM
Basic interface. The removed user who is in a session with the switch can continue working on the
switch until logging out.
Adding a set of users to multiple switches
The Security Administrator can add the same set of users to multiple switches.
NOTE: This feature is not available from the Element Managers.
To add the same set of users to multiple switches:
1. Click Apply To.