HP f2304 23-inch High Def LCD Monitor - Manual (Page 28)

4–8 User’s Guide
Operating the Monitor
Using the Auto Adjustment Function
You can easily optimize the screen performance for the VGA
interface by using the Auto button and the auto-adjustment
pattern software on the User Guide CD that came with this
monitor.
1. Insert the provided CD-ROM disc into the computer.
2. Run the software file Adjustment pattern.exe (from the
CD-ROM drive) to display a setup test pattern.
3. Press the Auto button on the monitor to produce a stable,
centered image.
Identifying Special OSD Messages
Special OSD messages appear on the monitor screen for the
following monitor conditions:
■ Input Signal Out of Range — Indicates the monitor
is unable to access or fully support the provided input
signal. The monitor’s preferred video mode is 1920 x
1200 @ 60Hz.
■ Going to Sleep — Indicates the monitor is entering a
reduced power state or “sleep” mode.
■ Check Video Cable — Indicates the video cable may
not be plugged into the computer or monitor, or that the
computer may not be turned on.
■ No Input Signal — Indicates the monitor is not
receiving a video signal from the PC or one of the five
monitor signal connectors. Check to see if the PC or input
signal source is off or in the power saving mode.
■ Multiple Inputs are active - Use the OSD to
select the desired video input — Indicates the
monitor has more than one video input.