Powering up and configuring the server, Installing the operating system – HP ProLiant DL320 G3 Server User Manual
Page 35
Server setup
35
Item Description
4 UID
button/LED
5
10/100/1000 NIC 1
6
10/100/1000 NIC 2
7
iLO management port
8 Serial
connector
9 Mouse
connector
10 Keyboard
connector
11 Video
connector
12 USB
connectors
Powering up and configuring the server
To power up the server, press the Power On/Standby button.
While the server boots, RBSU and the ORCA utility are automatically
configured to prepare the server for operating system installation. To configure
these utilities manually:
• Press the F8 key when prompted during the array controller initialization to
configure the array controller using ORCA.
• Press the F9 key when prompted during the boot process to change the server
settings, such as the settings for language and operating system, using RBSU.
The system is set up by default for the English language and a Microsoft®
Windows® 2000 installation.
For more information on the automatic configuration, refer to the ROM-Based
Setup Utility User Guide located on the Documentation CD.
Installing the operating system
To operate properly, the server must have a supported OS. For the latest
information on OS support, refer to the HP website