HP Deskjet 610c Printer - Manual (Page 7)

6
English
What do you want to print What you need to do
Labels 1. Slide out both of the paper adjusters.
2. Fan the edges of the label sheets to separate them, then even the edges.
3. Insert up to 25 label sheets (label side down) on top of about 5 sheets of plain
paper of the same size.
4. Slide the paper adjusters snugly against the sheets.
5. Choose print settings that match the type, size, and orientation of the labels.
6. Print the labels.
7. Reset the software for the paper in the IN tray after printing is completed.
Transparencies 1. Slide out both of the paper adjusters.
2. Fan the edges of the transparency sheets to separate them, then even the edges.
3. Insert up to 1/2 inch (1 cm) stack of transparency sheets. Load the rough side down
with the adhesive strip forward.
4. Slide the paper adjusters snugly against the transparencies.
5. Choose print settings that match the type and size of the transparencies.
6. Print the transparency.
7. Reset the software for the paper in the IN tray after printing is completed.
Note: You can also access HP’s convenient online manual from the HP Software CD. At any time while using your computer,
you can insert the CD and find a wealth of information at your fingertips.
OUT Tray
OUT tray removed for loading cards, etc.
Paper-width Adjuster
Paper-length Adjuster
Card guide in up position
Single envelope slot
Printing on Different Kinds of Paper
Alton-EuroUG.fm Page 6 Wednesday, April 14, 1999 12:33 PM