HP ProLiant DL385p Gen8 Server - Manual (Page 88)

Hardware options installation 88
8. Install the TPM board. Press down on the connector to seat the board (" System board components " on
page 15 ).
9. Install the TPM security rivet by pressing the rivet firmly into the system board.
10. Install the air baffle.
11. Do the following:
a. Install the primary PCIe riser cage (on page 31 ).
b. Install the secondary PCIe riser cage (" Secondary PCIe riser cage option " on page 74 ).
12. Install the access panel (on page 25 ).
13. Install the server into the rack (" Installing the server into the rack " on page 40 ).
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server (on page 23 ).