HP SB40c-Storage-Blade - Manual (Page 30)

Specifications 30
Specifications
In this section
Environmental specifications .................................................................................................................... 30
Storage blade specifications.................................................................................................................... 30
Environmental specifications
Specification Value
Temperature range
Operating* 10 ° C to 35 ° C (50 ° F to 95 ° F)
Maximum rate of change is 10º C/hr (50º F/hr)
Storage -30°C to 60°C (-22°F to 140°F)
Maximum rate of change is 20º C/hr (68º F/hr)
Relative humidity**
Operating 10% to 90% relative humidity (Rh), 28º C (82.4º F)
maximum wet bulb temperature, non-condensing
Storage 5% to 95% relative humidity (Rh), 38.7º C (101.66º F)
maximum wet bulb temperature, non-condensing
Altitude ‡
Operating 3048 m (10,000 ft)
This value may be limited by the type and number of options
installed.
Non-operating 9144 m (30, 000 ft)
* Temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048
m (10,000 ft) is applicable. No direct sunlight allowed. The upper limit may be limited by the type and number of
options installed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.
‡ Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Storage blade specifications
Specification Value
Height 5.56 cm (2.19 in)
Depth 50.95 cm (20.06 in)
Width 18.16 cm (7.15 in)
Weight (maximum) 5.0 (11.0)
Weight (no drives installed) 3.6 (8.0)