HP StorageWorks 2.32 Edge Switch - Manual (Page 93)

HA-Fabric Manager user guide 93
Configuring Call Home notification
When you configure Call Home notification, the appliance automatically dials in to a support
center to report system problems. Refer to the HA-Fabric Manager Appliance installation guide for
details.
Enabling Ethernet events
An Ethernet event occurs when the Ethernet link between the appliance and the managed product
is lost. To enable Ethernet events notification:
1. Select Monitor > Ethernet Event from the HAFM menu bar.
The Configure Ethernet Event dialog box appears (
Figure 58 ).
Figure 58 Configure Ethernet Event dialog box
2. Select the Enable Ethernet Event check box.
3. Enter the amount of time between the event and the notification in the Ethernet Time Out
box.
4. Click OK.