HP StorageWorks 2.32 Edge Switch - Manual (Page 92)

Monitoring SAN products 92
NOTE: When using the View Logs dialog box, you can copy only one row at a time. To copy
multiple rows of data, copy the data from the master log on the HAFM main window.
Using event notifications
You can configure the application to send event notifications to e-mail addresses at certain time
intervals. This is a convenient way to keep track of SAN events. You can also configure products to
“call home” to notify the support center of product problems.
Configuring e-mail notification
To configure e-mail notification:
1. Select Monitor > Event Notification > Email from the HAFM menu bar.
The Event Notification Setup dialog box appears (
Figure 57 ).
Figure 57 Event Notification Setup dialog box
2. Select the Enable Email Event Notification check box.
3. Enter the appropriate information in the following boxes:
• E-mail Server—IP address or name of the SMPT server
• Reply—Recipient’s e-mail address
• Interval—Amount of time between each notification
CAUTION: Specifying a short interval can cause the recipient’s e-mail inbox to fill quickly.
4. Click Test Email to test the e-mail server.
A message appears indicating if the server was found.
5. To specify which users receive e-mail notifications, click User List.
The HAFM 8 Server Users dialog box appears.
6. Select the check box in the Email column for each user you want to receive notification.
7. Click OK.
Notifications are combined into a single e-mail and sent at the specified interval setting. An interval
setting of 0 (zero) causes notifications to be sent immediately.