HP StorageWorks 2.32 Edge Switch - Manual (Page 178)

Troubleshooting 178
Broadcast request is blocked
by routers.
Resolution 1: If you know the IP addresses, and
they are not in the Available Addresses list:
1. Select Discover > Setup.
2. Click Add.
3. Enter data in the dialog box.
4. Click OK.
5. Repeat steps step 1 through step 4 until all
addresses are available.
6. Select the IP addresses you would like to
discover in the Available Addresses list.
7. Click to move your choices to the Selected
Individual Addresses list.
8. Click OK.
Resolution 2: If you know the IP addresses and
the addresses are listed in the Available
Addresses list:
1. Select Discover > Setup.
2. Select the IP addresses you would like to
discover in the Available Addresses list.
3. Click to move your choices to the Selected
Individual Addresses list.
4. Click OK.
Discovery time is excessive. Decrease the SNMP timeout to decrease the
discovery time.
Can’t open an Element
Manager for an HP device.
Ensure that only one copy of the application is
being used to monitor and manage the device.
The
symapi.jar
file is not
in the class path
Verify that the
symapi.jar
file has been copied
into HAFM’s
lib
directory.
Table 18 Discovery problems and resolutions (continued)
Problem Resolution