Figure 72 new plan dialog box, Opening a plan, Figure 73 open plan dialog box – HP StorageWorks 2.32 Edge Switch User Manual
Page 115: Adding devices, 72 new plan dialog box, 73 open plan dialog box
HA-Fabric Manager user guide 115
The New Plan dialog box appears (
).
Figure 72
New Plan dialog box
2.
Enter a name in the New Plan box.
3.
Select one of the following options:
• Start with discovered topology to use the discovered topology as the basis for the new
plan
• Start Empty to start the new plan with an empty topology
4.
Click OK.
Opening a plan
1.
Select SAN > Open Plan from the Planning window menu bar (or press Ctrl+O).
The Open Plan dialog box appears (
).
Figure 73
Open Plan dialog box
2.
Select a plan from the Open Plan list.
3.
Click OK.
Adding devices
You can add one device or multiple devices to the plan.
•
To add one device:
a. Click a device icon on the devices toolbox.
b. Click the Physical Map in the Planning window.
The new planned device icon appears on the Physical Map.
•
To add multiple devices:
a. Click the devices icon on the devices toolbox.