HP ProLiant BL465c G7 Server-Blade - Manual (Page 35)

Hardware options installation 35
13. Close the processor retaining bracket and the processor retaining latch.
CAUTION: To avoid damage to the system board, processor socket, and screws, do not
overtighten the heatsink screws. Use the wrench supplied with the system to reduce the
possibility of overtightening the screws.
14. Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly.
15. Install the front bezel/hard drive cage assembly.
16. Connect the hard drive cables (" Hot-plug SAS/SATA hard drive cabling " on page 39 ).
17. Connect the cache module capacitor cable (" Cache module capacitor cabling " on page 39 ).
18. Install the hard drives (" Hot-plug SAS or SATA hard drive option " on page 25 ).
19. Install the access panel (on page 15 ).
20. Install the server blade (" Installing a server blade " on page 18 ).
21. Power up the server blade (on page 13 ).