beautypg.com

Loading and unloading tape cartridges, Inserting tape cartridges, Figure 3-3 – HP Integrity NonStop J-Series User Manual

Page 19: Inserting a tape cartridge

background image

Operation

5344 Tape Drive Installation and User’s Guide — 546011-001

3 -5

Loading and Unloading Tape Cartridges

Loading and Unloading Tape Cartridges

Inserting Tape Cartridges

1. Insert a tape cartridge into the slot on the front panel. As the cartridge is inserted,

the drive takes it and performs a load sequence.

2. The Ready light flashes green while the drive performs its load sequence. When

the cartridge is loaded, the Ready light shows steady green.

Figure 3-3. Inserting a Tape Cartridge

Note.

Figure 3-3

shows a DAT 160 cartridge. These cartridges are wider than the earlier-

format DDS cartridges and can only be used in the 5344 tape drive.

See also other documents in the category HP Computer hardware: