HP StorageWorks 2.64 Director Switch - Manual (Page 164)

Fabric Zoning
164 High Availability Fabric Manager User Guide
6. Click Next.
An Activate Zone Set screen ( Figure 71 ) displays, listing the directors and
switches affected by the change in active zone sets. The switch/director
domain ID displays in the left panel and the WWN displays in the right panel.
The domain ID is a unique domain identification of a switch or director
product (for example, 1-31).
Messages may display in this screen warning you of possible consequences
when activating the new zone set.
Figure 71: Activate Zone Set (Directors/Switches Affected) screen
Click the radio buttons in the View By area to change the display in the right
panel between Director/Switch WWN, the product name configured through
the Product Manager, and the network address (or DNS host name).
7. Click Next.
A Status screen displays with further instructions.
8. Click Start to activate the zone set.
Messages appear in the screen about activation status in the fabric.
9. When the Activate zone Set complete message displays, click
Close to close the dialog box and complete the process.