American Megatrends APOLLO MAN-772 - Manual (Page 17)

Chapter 1 Hardware Installation 13
Step 2 Set Jumpers, Continued
EP1, EP2 Flash ROM Type EP1 and EP2 are 3-pin bergs that specify the type of flash ROM
installed on the motherboard. The settings are:
Flash ROM Type EP1 EP2
Intel 28F001 Short Pins 2-3 Short Pins 1-2
SST 29EE010 OPEN Short Pins 2-3
MXIC MX28F2000 Short Pins 2-3 Short Pins 2-3
SST 29EE020 OPEN Short Pins 2-3
ATMEL AT29C020 OPEN Short Pins 2-3
AMD 28F020 Short Pins 1-2 Short Pins 2-3
Avoid Static Electricity
Static electricity can damage the motherboard and other computer
components. Keep the motherboard in the anti-static bag until it is to be
installed. Wear an anti-static wrist grounding strap before handling the
motherboard. Make sure you stand on an anti-static mat when handling the
motherboard.
Avoid contact with any component or connector on any adapter card, printed
circuit board, or memory module. Handle these components by the mounting
bracket.