HP ENVY x2 CTO 11t-g000 - Manual (Page 65)

To access battery information, select HP Support Assistant from the Start screen, and then select
Battery and performance.
Conserving battery power
Tips for conserving battery power and maximizing battery life:
● Lower the brightness on the display.
● Select the Power saver setting in Power Options.
● Turn off wireless when you are not using them.
● Disconnect unused external devices that are not plugged into an external power source, such as
an external hard drive connected to a USB port.
● Stop, disable, or remove any external media cards that you are not using.
● Before you leave your work, initiate Sleep or shut down the computer.
Identifying low battery levels
When a battery that is the sole power source for the computer reaches a low or critical battery level,
the following behavior occurs:
● The battery light (select models only) indicates a low or critical battery level.
– or –
● The power meter icon on the Windows desktop shows a low or critical battery notification.
NOTE: For additional information about the power meter, refer to “Using the power meter”
section.
The computer takes the following actions for a critical battery level:
● If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains
briefly in the Sleep state, and then shuts down and loses any unsaved information.
● If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates
Hibernation.
Resolving a low battery level
Resolving a low battery level when external power is available
● Connect an AC adapter.
● Connect the keyboard dock to the tablet.
● Connect an optional power adapter purchased as an accessory from HP.
Resolving a low battery level when no power source is available
● Initiate Hibernation (see Enabling and exiting user-initiated Hibernation on page 51 ).
● Save your work and shut down the computer.
Running on battery power 55