HP StorageWorks 2.64 Director Switch - Manual (Page 78)

Configuring the Product
78 Embedded Web Server User Guide
The feature key can be installed while the product is online, except in the
following circumstances:
■ With E/OS 3.0 or earlier, the product must be offline before a feature can be
enabled.
■ If the new feature key removes existing functionality, the product must be
offline during the installation process.
(See “ Setting Product Online or Offline ” on page 137 for instructions on setting
the product offline.)
After obtaining the feature key, install the feature as follows:
1. Choose Operations from the navigation panel. The Operations page opens.
2. Click the Feature Installation tab. The Feature Installation tab view
displays ( Figure 20 ).
Note: If the new feature key is removing an existing feature of your system, you must
set the switch offline before completing the feature activation process.
Figure 20: Feature Installation tab view
3. Type the feature key and click Activate. The interface displays a confirmation
page with a warning, stating this action overrides the current set of product
features.