HP StorageWorks 2.64 Director Switch - Manual (Page 68)

Configuring the Product
68 Embedded Web Server User Guide
■ To populate the pending FBML with the active FBML list, see “ Loading All
Active FBML Members to the Pending FBML ” on page 69.
■ To populate the pending FBML with all of the attached switches or directors,
see “
Loading Only Attached Members to the Pending FBML ” on page 70.
Determining If the Pending FBML and Active FBML Are Identical
The Fabric Binding tab indicates whether the pending FBML and the active
FBML are identical.
1. Select Configure from the navigation panel.
2. Select the Security tab and the Fabric Binding tab. The Fabric Binding tab
view displays ( Figure 17 ).
3. Under the Actions to Modify the Pending Fabric Binding Membership
List (FBML) heading is text that indicates whether the pending FBML is
identical to or different from the active FBML.
If you want the pending FBML to match the active FBML, follow the procedure
in “
Loading All Active FBML Members to the Pending FBML ” on page 69.
Adding to the Pending FBML
Add members to the pending FBML using their WWN and domain ID. The
combination of WWN and domain ID cannot be a duplicate of another participant
in the fabric. The pending FBML can contain a maximum of maximum of 239
members. To add a new member to the pending FBML, perform the following
procedure:
1. Select Configure from the navigation panel.
2. Select the Security tab and the Fabric Binding tab. The Fabric Binding tab
view displays ( Figure 17 ).
3. At the bottom of the Actions to Modify the Pending Fabric Binding
Membership List (FBML) section, add a domain ID for the fabric member
in the Domain ID field. The value of the domain ID is a number in the range
1 to 239.
4. In the WWN field, type the WWN of the switch or director.
5. Select the Add button. The pending FBML redisplays, showing the added
fabric member.