HP StorageWorks 2.64 Director Switch - Manual (Page 59)

Configuring the Product
59 Embedded Web Server User Guide
■ WWNs can be added to the SBML without regard to whether Switch Binding
is enabled or disabled.
■ If the director or switch is online and Switch Binding is not enabled, all nodes
and switches attached to the director or switch are automatically added to the
SBML.
Enabling and Disabling Switch Binding
Note: Switch Binding can also be enabled by enabling the Enterprise Fabric Mode.
For more information, see “ Switch Binding and the Enterprise Fabric Mode ” on
page 72.
To enable or disable Switch Binding:
1. Select Configure from the navigation panel.
2. Select the Security tab and the Switch Binding tab. The Switch Binding tab
view displays ( Figure 16 ).