HP StorageWorks 2.64 Director Switch - Manual (Page 56)

Configuring the Product
56 Embedded Web Server User Guide
Binding Ports to Devices
The Port Binding tab view enables you to bind a specific switch or director port
to the WWN of an attached device for exclusive communication.
To configure port binding:
1. Choose Configure from the navigation panel.
2. Choose the Security tab and the Port Binding tab. The Port Binding tab
view displays ( Figure 15 ).
Figure 15: Configuring Port Binding
3. Click the check box in the Port Binding column next to the port number to
enable port binding for the port.
4. Identify the WWN to which the port is bound using one of the following
methods:
■ Enter the WWN to which the port is to bind in the Bound WWN column.
■ Click the check box in the Use Attached column. This option is valid
only if a WWN is present in the Attached WWN column for the port.
(The Attached WWN column indicates the WWN that is currently
attached to the port, but is not bound to it.)
Note: If the Port Binding check box is checked and a WWN is not specified for
binding, no devices can attach to the port.