HP StorageWorks 2.64 Director Switch - Manual (Page 53)

Configuring the Product
53 Embedded Web Server User Guide
c. Type the administrator password again in the Confirm New Password
field.
4. For the Operator set of data fields:
a. Type the operator user name (as specified by the customer’s network
administrator) in the New User Name field. Use 16 alphanumeric
characters or less.
b. Type the operator password (as specified by the customer’s network
administrator) in the New Password field. Use 16 alphanumeric
characters or less.
c. Type the operator password again in the Confirm New Password field.
5. Click Activate. The User Rights tab redisplays with the message Your
changes to the User Rights configuration have been
successfully activated. Login may be required
. The new
settings for user name and password are implemented.
Note: In some cases, you may need to log into EWS again to continue using EWS.
User Rights Settings
Table 2 lists the management functions provided by EWS along with the access
permissions for each function. If a user lacks the rights to access a specific
function, they will receive a login password dialog box indicating the rights
(either administrator or operator) required to access the function.
Table 2: User Rights Levels
Functionality
Administrator
Rights
Operator
Rights
View: Product Available Available
View: Port Properties Available Available
View: FRU Properties Available Available
View: Product Properties Available Available
View: Fabric - Products Available Available
View: Fabric - Topology Available Available
View: Operating Parameters Available Available
Configure: Ports Available Available