HP StorageWorks 2.64 Director Switch - Manual (Page 26)

Introduction
26 Embedded Web Server User Guide
Where to Start
Depending upon whether the Hewlett-Packard product you purchased has already
been installed, you may need to go to a specific chapter. If the product has not
been installed, you should start at “
Configuring the Product ” on page 29.
If the product was installed, then many of the configuration tasks were probably
already completed. In that case, you may need to configure a zone. Configuring
(including adding, deleting, and changing) zones is described in “
Configuring
Zones ” on page 81
If the products have been configured and you have a functioning SAN, then you
most likely will be interested in performing system administration tasks. Those
tasks are described in “
Viewing Product and Fabric Data ” on page 99,
“ Monitoring Products ” on page 117, and “ Operating and Managing Products and
Parts ” on page 135.
If you need to perform troubleshooting, then you will want to review “ Monitoring
Products ” on page 117 and “ Operating and Managing Products and Parts ” on
page 135.