Resetting ports, Figure 46: resetting ports, 46 resetting ports – HP StorageWorks 2.64 Director Switch User Manual
Page 142
Operating and Managing Products and Parts
142
Embedded Web Server User Guide
Resetting Ports
Choose Operations from the navigation panel. Choose the Port tab and the Reset
tab; the Reset tab view displays (
). Use this page to reset ports. This
action clears all statistics counters and disables port beaconing for the port. If a
product is attached to the port and is online, this operation sends a link reset to the
attached product; otherwise, this action disables port beaconing on the port. If the
port is in a failed state, such as after failing a loopback test, the reset restores the
port to an operational state and clears the service required (amber) LED. The reset
does not affect other ports in the product.
To reset a port, click once in the box for that port's row, so that a check mark
displays. When you have selected all ports to reset, click Activate. A message
displays confirming that the operation has completed.
Figure 46: Resetting ports