HP Pavilion dv5127eu Notebook PC - Manual (Page 155)

Setup Utility defaults
To return all settings in the Setup Utility to the values that were set at the factory:
1. Open the Setup Utility by turning on or restarting the computer, and then pressing f10 while the
“Press to enter setup” message is displayed in the lower-left corner of the screen.
2. To reset the Setup Utility factory defaults:
● Press f9 .
– or –
● Use the arrow keys to select Exit > Load Setup Defaults, and then press enter .
3. When the Setup Confirmation dialog box is displayed, press enter .
4. To save your preferences and exit the Setup Utility:
● Use the arrow keys to select Exit > Exit Saving Changes, press enter , and then follow the
instructions on the screen.
– or –
● Press f10 , and then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE Your password, security, and language settings are not changed when you restore
the factory default settings.
ENWW Setup Utility defaults 145