HP vp6210 Digital Projector - Manual (Page 17)

4. Connection 17
4. Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, only certain cables are included with the projector (see
page
8 ). Other cables are available from HP or from electronics stores.
Connecting to a Laptop or Desktop Computer
Connecting Component-Video Devices
The projector is capable of displaying various High Definition TV display modes.
Some of these sources are:
Most of these sources will provide an analog component video output, a standard
VGA output, or a YP
b P r (default) format.
The projector is capable of accepting HDTV data through a Component Video con-
nector. Use a Component Video cable (an optional accessory) to display these
images.
The following standards are supported in the HDTV function:
USB cable
Audio cable
VGA cable
• Digital-VHS (D-VHS) player • DVD player
• Satellite Dish HDTV receiver • Digital TV tuners
• 480i • 480p
• 576i • 576p
• 720p (50/ 60 Hz) • 1080i (50/ 60 Hz)
AV equipment
YPbPr
Component Video Cable
VGA
Audio cable